Halfshaft Seal - RH

Halfshaft Seal - RH





Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the 4 retainers and the underbody shield.





3. Remove the intermediate shaft.

4. Using an awl, poke a small hole in the halfshaft seal.





5. Using a dent puller, remove and discard the halfshaft seal.





Installation

1. Install a new halfshaft seal on the Seal Installer and Handle.





2. Using the Seal Installer and Handle, install the RH halfshaft seal.





3. Install the intermediate shaft.

4. Check and top off the transmission fluid to the correct level. Refer to Transmission Fluid Level Check .