Intermediate Shaft

Intermediate Shaft - All Wheel Drive (AWD)









Removal

NOTICE: The intermediate shaft seal in the Power Transfer Unit (PTU) must be replaced whenever the intermediate shaft is removed. For additional information, refer to Transfer Case.

1. Remove the right halfshaft assembly. For additional information, refer to Halfshaft- RH Halfshaft - RH.

2. Remove the 2 intermediate shaft support bracket bolts and the intermediate shaft.

Installation

1. Install a new intermediate shaft seal in the Power Transfer Unit (PTU).

2. Position the intermediate shaft in the PTU (Power Transfer Unit) and engage the intermediate shaft splines with the PTU (Power Transfer Unit) gears.

3. Install the 2 intermediate shaft support bracket bolts.
- Tighten to 40 Nm (30 lb-ft).


4. Install the right halfshaft. For additional information, refer to Halfshaft- RH Halfshaft - RH.