Shift Cable: Adjustments

Selector Lever Cable Adjustment

1. Place the selector lever in the D position.





2. Disconnect the selector lever cable end from the manual control lever.





3. Place the manual control lever in the D position.
1. Rotate the manual control lever counterclockwise to the PARK position.

2. Rotate the manual control lever clockwise 3 detents to the D position.






4. Release the selector lever cable adjuster lock.
1. Pull out on the adjuster lock tabs.

2. Slide the lock over to unlock the selector lever cable.






5. Align the selector lever cable end to the manual control lever ball stud and install it with the adjuster unlocked.





6. Slide the adjuster tab in place to lock the selector lever cable.