Transaxle/Transmission Cooling

Motor Electronics Cooler










1. Drain the Motor Electronics Cooling System (MECS). For additional information, refer to Motor Electronics Cooling System Draining and Filling Procedures.

2. Remove the front bumper cover.

3. Loosen the hose clamp and disconnect the MECS (Motor Electronics Cooling System) radiator inlet hose.





4. Loosen the hose clamp and disconnect the MECS (Motor Electronics Cooling System) radiator outlet hose.





5. NOTE: RH shown, LH similar.
Remove the MECS (Motor Electronics Cooling System) radiator bolts.

- To install, tighten to 6 Nm (53 lb-in).






6. To install, reverse the removal procedure.