Transaxle Support Insulator - Lower, Front

Transaxle Support Insulator - Lower, Front









Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the LH splash shield.





3. Remove the 4 bolts and the rear cross brace.





4. Remove the lower front insulator through bolt and the 2 cross brace bolts.





5. Remove the cross brace nut and remove the brace.





Installation

1. Position the cross brace in place and install the nut.
- Tighten to 175 Nm (129 lb-ft).






2. Install the 2 bolts for the cross brace.
- Tighten to 90 Nm (66 lb-ft).






3. Install the lower front support insulator through bolt for the mount.
- Tighten to 115 Nm (85 lb-ft).






4. Install the rear cross brace and the 4 bolts.
- Tighten to 115 Nm (85 lb-ft).






5. Install the LH splash shield and the retainers.