Transaxle Support Insulator - LH

Transaxle Support Insulator - LH













Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the Air Cleaner (ACL).

3. Using the Engine Support Bar and Adapters, support the engine.





4. Remove the 4 LH transaxle support insulator bolts.
- To install, tighten to 48 Nm (35 lb-ft).


5. Remove the through bolt and the LH transaxle support insulator.
- To install, tighten to 103 Nm (76 lb-ft).


6. Remove the 3 nuts and the LH transaxle support insulator bracket.
- To install, tighten to 40 Nm (30 lb-ft).


7. To install, reverse the removal procedure.