Maintenance Required Lamp/Indicator: Service and Repair

Oil Life Reset

An Oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change perform the following:

1. Press and release the SETUP button until the message center displays OIL LIFE=XXX% HOLD RESET=NEW.

2. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

Note: To change the oil life 100% value to another value, proceed to step 3.

3. Once "OIL LIFE SET TO XXX%" is displayed, release and press the reset button to change the Oil Life Start Value. Each release and press will reduce the value by 10%