Removal and Replacement

Heater Core









Removal and Installation

NOTE: If a heater core leak is suspected, the heater core must be leak tested before the heater core is removed.

NOTE: Use only the approved coolant for this vehicle. For additional information, refer to Cooling System &/or Engine Block Heater or Cooling System.

1. Remove the heater core and evaporator core housing. For additional information, refer to Heater Core And Evaporator Core Housing .

2. Remove the dash panel seal.

3. Remove the heater core bracket screw and the heater core bracket.
- To install, tighten to 3 Nm (27 lb-in).


4. Remove the heater core.

5. To install, reverse the removal procedure.