Fuel Pump Control Unit: Service and Repair

Fuel Pump Control Module









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. NOTE: The Fuel Pump (FP) control module is located near the left rear side of the fuel tank.
Disconnect the FP (Fuel Pump) control module electrical connector.


3. NOTICE: Do not overtighten the fasteners or damage will occur.

Remove the 2 bolts and the FP (Fuel Pump) control module.
- To install, tighten to 5 Nm (44 lb-in).


4. To install, reverse the removal procedure.