Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Escape 4WD L4-2.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Transmission Speed Sensor: Service and Repair




Turbine Shaft Speed (TSS) Sensor





Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the retainers and the LH splash shield.





3. Disconnect the Turbine Shaft Speed (TSS) electrical connector, remove the bolt and the TSS (Turbine Shaft Speed) sensor.





Installation

1. Install the TSS (Turbine Shaft Speed) sensor, the bolt and connect the TSS (Turbine Shaft Speed) electrical connector.
- Tighten to 10 Nm (89 lb-in).






2. Install the LH splash shield and the retainers.





3. Fill the transaxle with clean transmission fluid.

4. Using the scan tool with the engine running, check and make sure that the transmission is at normal operating temperature 85-93°C (185-200°F). Check and adjust the transmission fluid level and check for any leaks. If transmission fluid is needed, add transmission fluid in increments of 0.24L (0.5 pt) until the correct level is achieved.
pro multis · About Operation CHARM