Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Escape 4WD L4-2.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shifter M/T >> Service and Repair >> Gearshift Lever
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gearshift Lever




Gearshift Lever









Removal

1. Remove the gearshift lever knob and boot assembly.

2. Remove the floor console finish panel.

3. Remove the 2 gearshift cable clips.





4. Carefully disconnect the gearshift cables from the gearshift lever.

5. Remove the 4 gearshift lever nuts.

6. Remove the gearshift lever.

Installation

1. Position the gearshift lever.

2. Connect the gearshift cables to the gearshift lever.









3. NOTE: Make sure the clips are set completely within the cable adapter groove and fully seated.
Install the 2 gearshift cable clips.






4. Install the 4 gearshift lever nuts.
- Tighten to 25 Nm (18 lb-ft).


5. Adjust the gearshift cables.

6. Install the floor console finish panel.

7. Install the gearshift lever knob and boot assembly.
pro multis · About Operation CHARM