Selector Lever Bezel

Selector Lever Bezel

Removal










1. Place the selector lever in the D position.





2. Gently pry up to remove the selector lever trim ring.





3. Lift the center console lid and remove the center console compartment tray.





4. Remove the top finish panel from the center console.





5. Disconnect the power outlet electrical connector.





6. Remove the selector lever knob trim covers by carefully prying out on the bottom front corners and then pry out on the top front corner and remove the covers.





7. Remove the 2 selector lever knob screws and remove the selector lever knob.





8. Remove the selector lever bezel light socket from the selector lever bezel.
- If necessary, remove the light bulb.






9. NOTE: Selector lever removed for clarity.
Release the tabs and remove the selector lever bezel from the selector lever.






Installation

1. NOTE: Selector lever removed for clarity.
Install the selector lever bezel. Be sure the tabs are correctly fastened on the selector lever.






2. If necessary, install a new selector lever bezel light bulb.

3. Install the selector lever bezel light socket in the selector lever bezel.





4. Install the selector lever knob and the 2 screws.





5. Install the selector lever knob trim covers.





6. Connect the power outlet electrical connector.





7. Install the center console finish panel.





8. Install the center console compartment tray.





9. Install the selector lever trim ring.