Third Row Seats

Seats

Third Row Seats

NOTE: The Smart Junction Box (SJB) may also be identified as the Generic Electronic Module (GEM).

The third row seats are a 60/40 percent folding split bench design with optional power-fold system option.

The third row seat includes the following serviceable items:

- All trim covers

- Backrest and cushion foam pads

- Backrest and cushion covers

- Backrest and cushion frames

- Release handle and bezel attached to the backrest frame

- Seat track attached to the seat base

- Safety belt buckles attached to the seat track

- Center safety belt retractor attached to the 60 percent seat backrest frame

Third Row Power-Fold Seat

The third row power-fold seats are activated by the rear power-fold seat switches. The power-fold seats only operate with the vehicle in PARK, and the liftgate glass, liftgate door or any entry door is open, allowing the SJB (Smart Junction Box) to enable power to the third row power-fold seat system.

The third row power-fold seat system includes the following serviceable components:

- SJB (Smart Junction Box) located behind the instrument panel

- RH and LH third row power-fold seat relays located behind the RH rear quarter trim panel

- RH and LH power-fold seat motors attached to the base of the seat

- RH and LH rear third row seat switches attached to the RH rear quarter trim panel

- RH and LH drive gear assemblies attached to the base of the seat

The third row power-fold seat motors control drive gear assemblies to raise and lower the seat backrests. The power-fold motors are serviceable separately.