Seat Cushion Cover - Third Row

Seat Cushion Cover - Third Row

Removal and Installation

NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row Seat - Exploded View, Third Row.

NOTE: LH shown, RH similar.

1. Remove the seat. For additional information, refer to Seat- Third Row Seat - Third Row.

2. Raise the cushion, separate the cushion cover hook-and-loop strips and release the J-clips.

3. Remove the cushion cover and foam pad from the cushion frame.

4. NOTICE: Use care when separating the cushion cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the cushion foam pad.

Separate the hook-and-loop strips and invert the cushion cover to the row of hog rings.






5. Remove all hog rings and cushion cover.

6. To install, reverse the removal procedure.