Fuel Tank Pressure Sensor: Service and Repair

Fuel Tank Pressure Sensor

106L (28 Gal) Fuel Tank










127L (33.5 Gal) Fuel Tank









Removal and Installation

All fuel tanks

1. Remove the fuel tank.

2. Disconnect the fuel supply tube-to-heat shield pushpin retainer.

127L (33.5 gal) fuel tank

3. Remove the fuel tank heat shield retainer(s).

All fuel tanks

4. Remove the fuel tank heat shield.

5. Disconnect the Fuel Tank Pressure (FTP) sensor and vapor tube assembly-to-fuel vapor/grade vent valves quick connect couplings. For additional information, refer to Fuel Delivery and Air Induction.

6. Disconnect the FTP (Fuel Tank Pressure) sensor and vapor tube assembly-to-fuel pump module quick connect coupling. For additional information, refer to Fuel Delivery and Air Induction.

7. Remove the FTP (Fuel Tank Pressure) sensor and vapor tube assembly from the fuel tank.

8. To install, reverse the removal procedure.
- Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test Testing and Inspection.