Diagnostic Routine E

Diagnostic Routine E

Diagnostic Overview

The IPC Infotainment Display Is Inoperative

Refer to Wiring Diagram Set 130 for schematic and connector information Electrical Diagrams.

Normal Operation and Fault Conditions

REFER to Instrument Panel Cluster (IPC) Infotainment Display .

Pinpoint Test

1. CHECK THE INFOTAINMENT DISPLAY

1. Ignition ON.

2. Check the RH (Right Hand) infotainment display in the IPC (Instrument Panel Cluster).

Is the display blank?








2. CHECK FOR DTCs (Diagnostic Trouble Codes) FROM THE SCCM (Steering Column Control Module) SELF-TEST

1. Using a scan tool, perform the SCCM (Steering Column Control Module) self-test.

Are any DTCs (Diagnostic Trouble Codes) related to the RH (Right Hand) steering wheel switch present?








3. CHECK FOR DTCs (Diagnostic Trouble Codes) FROM THE IPC (Instrument Panel Cluster) SELF-TEST

1. Using a scan tool, perform the IPC (Instrument Panel Cluster) self-test.

Is DTC (Diagnostic Trouble Code) U0212:00 present?








4. CHECK FOR CORRECT SCCM (Steering Column Control Module) OPERATION

1. Ignition OFF.

2. Disconnect and inspect all SCCM (Steering Column Control Module) connectors.

3. Repair:

- corrosion (install new connectors or terminals - clean module pins)
- damaged or bent pins - install new terminals pins
- pushed-out pins - install new pins as necessary

4. Reconnect all SCCM (Steering Column Control Module) connectors. Make sure they seat and latch correctly.

5. Operate the system and determine if the concern is still present.

Is the concern still present?