Diagnostic Routine R

Diagnostic Routine R

Diagnostic Overview

Exterior Door Release Handle Sticks

Normal Operations and Fault Conditions

The exterior door handle is connected to the door latch with an actuating rod. When the exterior door handle is pulled the actuating rod pushes down on the latch lever. When the latch lever is moved, the door latch releases, allowing the door to open. The handle has a return spring to make sure the handle returns to a closed position.

Pinpoint Test

1. CHECK FOR A BROKEN RETURN SPRING

1. Remove the door trim panel. REFER to Door Trim Panel - Front or REFER to Door Trim Panel - Rear .

2. Open the clip and disconnect the exterior door handle actuating rod.





3. Pull and release the exterior door handle.

Does the exterior door handle return to a closed position once released?








2. CHECK THE EXTERIOR DOOR HANDLE AND LINKAGE OPERATION

1. Operate the exterior door handle while observing the linkage.

Are any of the exterior door handle components or linkages binding?