Armrest

Armrest

Removal

NOTE: For parts identification and location, REFER to Seat - Exploded View .

1. Remove the 2 center head restraint guide sleeves. REFER to Head Restraint Guide Sleeve .

2. Open the backrest cover.

1. Detach the backrest cover J-clips at the bottom of the seat backrest.

2. Remove the 4 pin-type retainers.

3. Detach the 4 backrest cover inner J-clips attached to the hard back panel.

4. Detach the hook-and-loop strips.






3. Pull the backrest cover out.





4. Remove the armrest.

1. Remove the 3 screws.

2. Remove the 3 armrest-to-backrest frame bolts.
- To install, tighten to 15 Nm (133 lb-in).

3. Detach the 2 retaining clips.

4. Pull out at the front and remove the armrest assembly.






Installation

1. To install, reverse the removal procedure.