Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Explorer FWD L4-2.0L Turbo >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor - Front




Wheel Speed Sensor - Front

Exploded View










Removal

1. Remove the wheel and tire. REFER to Wheel and Tire .

2. Remove the fender splash shield. REFER to Fender Splash Shield .

3. Disconnect the wheel speed sensor electrical connector.

4. Detach the 2 pin-type retainers.

5. Detach the 2 grommets from the routing brackets.

6. Remove the front wheel speed sensor bolt and the front wheel speed sensor.

Installation

1. Position the front wheel speed sensor and install the front wheel speed sensor bolt.
- Tighten to 15 Nm (133 lb-in).

2. Attach the 2 grommets to the routing brackets.

3. Attach the 2 pin-type retainers.

4. Connect the wheel speed sensor electrical connector.

5. Install the fender splash shield. REFER to Fender Splash Shield .

6. Install the wheel and tire. REFER to Wheel and Tire .

pro multis · About Operation CHARM