Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Explorer FWD L4-2.0L Turbo >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pressure Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pressure Sensor/Switch: Service and Repair




Fuel Rail Pressure (FRP) Sensor - 2.0L GTDI

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Material(s)






Removal

1. Remove the upper CAC (Charge Air Cooler) inlet tube and intermediate CAC (Charge Air Cooler) inlet tube. REFER to Charge Air Cooler .

2. Disconnect the FRP (Fuel Rail Pressure) sensor electrical connector.





3. Remove the FRP (Fuel Rail Pressure) sensor.





Installation

1. Install the FRP (Fuel Rail Pressure) sensor and tighten in the following 5 stages:
- Stage 1: Tighten to 6 Nm (53 lb-in).
- Stage 2: Tighten an additional 5 degrees.
- Stage 3: Loosen 90 degrees.
- Stage 4: Tighten to 6 Nm (53 lb-in).
- Stage 5: Tighten an additional 21 degrees.





2. Connect the FRP (Fuel Rail Pressure) sensor electrical connector.





3. Install the upper CAC (Charge Air Cooler) inlet tube and intermediate CAC (Charge Air Cooler) inlet tube. REFER to Charge Air Cooler .

pro multis · About Operation CHARM