Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Explorer FWD L4-2.0L Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Flex Plate >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement




Flexplate

Special Tool(s)






Removal

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Jacking and Lifting .

2. Remove the transaxle. REFER to Transmission .

3. NOTE: Do not reuse the flexplate bolts.
Install 303-103 (T74P-6375-A) and remove the 6 bolts and the flexplate.

- Discard the bolts.






Installation

1. NOTE: Special bolts are used for installation. Do not use standard bolts.
Install the flexplate, the 6 new bolts and the Flywheel Holding Tool.
-
- Tighten in the sequence shown in 3 stages:
- Stage 1: Tighten to 50 Nm (37 lb-ft).
- Stage 2: Tighten to 80 Nm (59 lb-ft).
- Stage 3: Tighten to 120 Nm (89 lb-ft).





2. Install the transaxle. REFER to Transmission .

3. After completing the repairs, use the scan tool to perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.


pro multis · About Operation CHARM