Windshield Washer Hose: Service and Repair

Washer Hose Repair

General Procedure

1. Locate and verify the leaking washer hose.

2. Cut the hose cleanly and remove the damaged portion of the washer hose.





3. Install a windshield washer hose adapter between the cut ends of the hose.

4. NOTE: In difficult cases, clamping may be required.
Install a segment of 6.4 mm (0.252 in) inside diameter black rubber hose over the ends of the washer hose, and clamp both ends of the rubber hose using spring clamps.