Generator Current Sensor

Generator Current Sensor

Exploded View





NOTE: 3.5L Ti-VCT shown, 2.0L GTDI similar.






Removal

1. Disconnect the battery. REFER to Battery Disconnect .

2. Position the generator B+ terminal cover aside, remove the nut and position the generator B+ terminal aside.

3. Remove the generator B+ terminal cover from the battery cable.

4. Disconnect the generator current sensor electrical connector.

5. NOTE: Note the orientation and position of the generator current sensor tape tab.
Index-mark the battery cable at the generator current sensor. Remove and discard the tape securing the generator current sensor to the battery cable and remove the generator current sensor.

Installation

1. NOTE: The generator current sensor must be installed in the proper position and orientation to function correctly.
With the generator current sensor tape tab pointing upward, position the generator current sensor to the index-mark on the battery cable and secure with electrical tape.

2. Connect the generator current sensor electrical connector.

3. Install the generator B+ terminal cover to the battery cable.

4. Connect the generator B+ terminal and install the nut. Position the generator B+ terminal cover.

- Tighten to 17 Nm (150 lb-in).

5. Connect the battery. REFER to Battery Disconnect .