Differential Lock: Service and Repair

Electronic Locking Differential (ELD) Field Coil













Removal

1. Remove the differential carrier. For additional information, refer to Differential Carrier .

2. Using the Bearing Puller plate, Step Plate and a suitable press, remove the LH differential bearing.





3. Remove and discard the 6 screws and 3 stoppers that hold the Electronic Locking Differential (ELD) coil in place and remove the coil.





4. Remove and discard the plunger assembly.





Installation

1. Install a new plunger assembly.





2. Install the new ELD (Electronic Locking Differential) coil, 3 stoppers and 6 screws that hold the coil in place.
- Tighten to 5 Nm (44 lb-in).






3. Use the Differential Carrier Bearing Installer to install the LH differential bearing.





4. Install the differential carrier. For additional information, refer to Differential Carrier .