Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> F 150 2WD V8-5.0L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Seat Occupant Classification Module - Air Bag >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Occupant Classification Module - Air Bag: Service and Repair




Occupant Classification System Module (OCSM)

Manual Seat










Power Seat









Removal and Installation

1. NOTE: Ignition must be OFF when disconnecting the Occupant Classification System Module (OCSM) electrical connector. Otherwise, a DTC will set in the Restraints Control Module (RCM) memory and must be cleared before releasing the vehicle.
Turn the ignition OFF and wait at least one minute.


2. Disconnect the OCSM (Occupant Classification System Module) electrical connector.

3. Remove the 2 screws and OCSM (Occupant Classification System Module).

4. To install, reverse the removal procedure.

5. If a new OCSM (Occupant Classification System Module) has been installed, carry out the Occupant Classification System (OCS) System Reset procedure. For additional information, refer to Occupant Classification Sensor (OCS) System Reset in the General Procedures.
pro multis · About Operation CHARM