Seat Latch Striker - Rear, Crew Cab

Seat Latch Striker - Rear, Crew Cab

NOTE: 40 percent shown, 60 percent similar.









Removal and Installation

1. NOTE: The seat backrest latch is only accessible when the seat cushion is raised.
Release the backrest latch.

- From behind the backrest, pull up on the latch release and pull the backrest forward.

- Release the cushion latch and lower the cushion and backrest.

- To install, slide the striker pin up/down and align to the backrest latch.






2. Remove the bolt and striker.
- To install, tighten to 25 Nm (18 lb-ft).


3. To install, reverse the removal procedure.
- Make sure the backrest is fully latched when completed.