B-Pillar Trim Panel - SuperCab

B-Pillar Trim Panel - SuperCab

Removal and Installation

1. Remove the rear seat backrest.

2. Pull upward to release the scuff plate clips and remove the scuff plate trim panel.
- Detach the scuff plate from the weatherstrip.






3. Reposition the rear door weatherstrip.

4. Remove the B-pillar trim panel pin-type retainer.

5. Remove the B-pillar trim panel bolt cover.

6. NOTE: Starting at the top of the cover, use a non-marring tool.
Remove the B-pillar trim panel bolt.

- To install, tighten to 9 Nm (80 lb-in).


7. Pull inward to release the B-pillar trim panel clips.

8. Reposition the B-pillar trim panel.

9. Remove the safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).


10. Reposition the safety belt through the B-pillar trim panel and remove the B-pillar trim panel.

11. To install, reverse the removal procedure.