Selector Lever Mechanism - Column Shift

Selector Lever Mechanism - Column Shift









Removal and Installation

1. NOTE: To access the top selector lever mechanism bolts, position the selector lever in NEUTRAL before removing the selector lever.
Remove the selector lever. For additional information, refer to Selector Lever- Column Shift .

2. Disconnect the Brake Shift Interlock Actuator (BSIA) electrical connector.





3. Disconnect the selector lever cable.





4. Remove and discard the 3 bolts and remove the selector lever mechanism.
- To install, tighten to 10 Nm (89 lb-in).






5. To install, reverse the removal procedure.