Collision Avoidance - Rear Camera Zoom Feature Inoperative
TSB 12-5-1305/29/12
REVERSE CAMERA ZOOM FEATURE INOPERATIVE -
BUILT ON OR BEFORE 3/29/2012
FORD:
2012 F-150
ISSUE
Some 2012 F-150 vehicles built on or before 3/29/2012 and equipped with reverse camera display in the rear view mirror may exhibit the manual zoom and/or auto zoom feature incorrectly displaying as a selectable feature in the instrument panel cluster (IPC) message center.
ACTION
Follow the Service Procedure to correct the condition.
SERVICE PROCEDURE
1. Check if the manual zoom feature is enabled in the message center and/or if there is an auto zoom feature incorrectly displayed in the IPC message center.
2. Check for diagnostic trouble codes (DTCs) in the reverse camera system.
3. Is the zoom feature enabled and/or is there an auto zoom feature incorrectly displayed in the IPC message center with DTCs?
a. Yes - proceed to Step 4.
b. No - this article does not apply.
4. Using the IDS reinstall the as-built data for the IPC.
a. ID the vehicle.
b. Select the tool box at the vehicle screen.
c. Select Module Programming.
d. Select As-Built.
e. Select Instrument Panel Cluster.
f. Select VIN verification (Note: This may or may not display).
g. Screen prompt: if you were here directed by Programmable Module Installation or Module Reprogramming, select No and continue.
h. Is IDS connected to internet?
(1) Yes - select Automatic and follow screen prompts.
(2) No - select Manual and proceed to Step i.
i. Go to Professional Technician Society web site to obtain As-Built data, follow screen prompts to manually add as-built data.
j. When As-Built downloaded is displayed, select tick mark to exit.
The auto zoom option in the ICP message center will no longer be available after as-built reconfiguration, as this function was unavailable for the F-150.
WARRANTY STATUS:Eligible Under Provisions Of New Vehicle Limited
Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals
are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
120513A2012 F-150: Inspect And 0.3 Hr.
Correct The As-Built Data
(Do Not Use With Any
Other Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
10849 04
Disclaimer