Seat Wire Harness Routing

Seat Wire Harness Routing

1. Install the front passenger seat wire harness. For correct installation, refer to the following views. Retainers and electrical connectors are numbered in order of assembly. Match the numbers in the Retainer and Connector Location Views and attach accordingly.
- For manual seat illustrations, refer to Manual Passenger Seat Track.

- For heated seat illustrations, refer to Power Passenger Heated Seat.

- For climate controlled seat illustrations, refer to Power Passenger Climate Controlled Seat.


2. NOTE: Illustration shows Occupant Classification System (OCS) weight sensor bolts in their installed position with the seat in the vehicle (arrow indicates front).
Verify the correct passenger seat OCS (Occupant Classification System) weight sensor bolt electrical connector positions using the illustration.

- For correct identification and placement of the 2 OCS (Occupant Classification System) weight sensor bolt electrical connectors, use the wire colors identified in the Wiring Diagrams Set 46. Connecting the incorrect connector to a sensor will cause DTCs to set and will result in an unsuccessful OCS (Occupant Classification System) System Reset [1][2]Diagrams By Number.






Manual Passenger Seat Track

Manual Seat Wire Harness View

NOTE: Refer to the steps at the beginning of this procedure for installation instructions.









a Refer to view B.

b Refer to view A.

c Make sure wire harness routes on the correct side of seat track lever, as shown.

Wire Harness Retainer and Connector Location View

NOTE: Harness is attached to the seat track as it should appear in the vehicle.





1. Compare the seat with Wire Harness Retainer and Connector Location View to verify correct installation.

Power Passenger Heated Seat

Heated Seat Wire Harness View

NOTE: Refer to the steps at the beginning of this procedure for installation instructions.









a Refer to Wire Harness Retainer and Connector Location View - Front Height Motor.

b Refer to Wire Harness Retainer and Connector Location View - Inboard Side.

c Refer to Wire Harness Retainer and Connector Location View - Outboard Side.

d Refer to Wire Harness Retainer and Connector Location View - Front of Seat.

e Electrical connector must be attached to the seat bottom side, as shown. Refer to Completed Wire Harness Installation View.

f Electrical connector and wire harness must be routed on the correct side of side shield attachment wire, as shown. Refer to Wire Harness Retainer and Connector Location View - Outboard Side.

Wire Harness Retainer and Connector Location View - Main





Wire Harness Retainer and Connector Location View - Front of Seat





Wire Harness Retainer and Connector Location View - Front Height Motor





Wire Harness Retainer and Connector Location View - Inboard Side





Wire Harness Retainer and Connector Location View - Outboard Side





Completed Wire Harness Installation View

NOTE: Harness is attached to the seat track as it should appear in the vehicle.





1. Compare the seat with Completed Wire Harness Installation View to verify correct installation.

Power Passenger Climate Controlled Seat

Climate Controlled Seat Wire Harness View

NOTE: Refer to the steps at the beginning of this procedure for installation instructions.









a Refer to Wire Harness Retainer and Connector Location View - Front Height Motor.

b Refer to Wire Harness Retainer and Connector Location View - Motor Bracket.

c Refer to Wire Harness Retainer and Connector Location View - Inboard Side.

d Refer to Wire Harness Retainer and Connector Location View - Outboard Side.

e Refer to Wire Harness Retainer and Connector Location View - Front of Seat.

f Electrical connector must be attached to the seat bottom side, as shown. Refer to Wire Harness Retainer and Connector Location View - Motor Bracket.

g Electrical connector and wire harness must be routed on the correct side of side shield attachment wire, as shown. Refer to Wire Harness Retainer and Connector Location View - Outboard Side.

h Wire harness must correctly pass over other harnesses, as shown. Refer to Wire Harness Retainer and Connector Location View - Motor Bracket.

Wire Harness Retainer and Connector Location View - Main





Wire Harness Retainer and Connector Location View - Front of Seat





Wire Harness Retainer and Connector Location View - Motor Bracket





Wire Harness Retainer and Connector Location View - Front Height Motor





Wire Harness Retainer and Connector Location View - Inboard Side





Wire Harness Retainer and Connector Location View - Outboard Side





Completed Wire Harness Installation View

NOTE: Harness is attached to the seat track as it should appear in the vehicle.





1. Compare the seat with Completed Wire Harness Installation View to verify correct installation.