Turbine Shaft Speed (TSS) Sensor

Turbine Shaft Speed (TSS) Sensor









Removal

1. Remove the main control. For additional information, refer to Main Control Main Control.

2. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.





3. Remove the bolt and remove the TSS (Turbine Shaft Speed) sensor.





Installation

1. Install the TSS (Turbine Shaft Speed) sensor and install the bolt.
- Tighten to 11 Nm (97 lb-in).






2. Connect the TSS (Turbine Shaft Speed) sensor electrical connector.





3. Install the main control. For additional information, refer to Main Control Main Control.