Seat Backrest - Rear, Crew Cab

Seat Backrest - Rear, Crew Cab

Removal and Installation

1. Remove the 60/40 percent rear seat. For additional information, refer to Seat- Rear, Crew Cab Seat - Rear, Crew Cab.

2. Remove the 2 bolts from the back side of the center support.
- To install, tighten to 50 Nm (37 lb-ft).

3. Separate the 40 percent seat and the 60 percent seat from the center support.

4. Remove the screw and side latch shield.

5. Remove the screw and cushion release handle.

6. Pry the side shield to release the 3 clips and remove the side shield.

7. Remove the 2 backrest latch-to-backrest frame bolts and the backrest assembly.
- To install, tighten to 50 Nm (37 lb-ft).

8. To install, reverse the removal procedure.