Oil Cooler: Service and Repair

Oil Cooler













Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Drain the engine cooling system. For additional information, refer to Cooling System &/or Engine Block Heater.

3. Remove and discard the oil filter.
- To install, tighten to 16 Nm (142 lb-in).

4. Disconnect the oil cooler coolant hoses and position aside.

5. NOTICE: If metal foreign material is present in the oil cooler, mechanical concerns exist. To diagnose mechanical concerns, refer to Engine.

Remove the threaded shaft and the oil cooler. Inspect the engine oil cooler.
- To install, tighten to 58 Nm (43 lb-ft).

6. To install, reverse the removal procedure.