45000 MI or 72000 KM
InspectWheels
Inspect wheels and related components for abnormal noise, wear, looseness or drag. Inspect wheels and related components for abnormal noise, wear, looseness or drag. If using Special Operating Conditions, T, I, D.
Vehicle
Recommended Multi-point Inspection
Universal Joint, Drive/Propeller Shaft
Inspect and lubricate U-joints. If using Special Operating Conditions, T, I, D, O. Inspect front axle and U-joints; lubricate if equipped with grease fittings.
Tie Rod End
Steering and Suspension
Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
Fluid - A/T
Inspect automatic transmission fluid level (if equipped with dipstick).
Exhaust System
Inspect exhaust system and heat shields.
Drive/Propeller Shaft
Lubricate if equipped with grease fittings.
Drive Axles, Bearings and Joints
Inspect front axle and U-joints; lubricate if equipped with grease fittings.
Cooling System
Inspect engine cooling system concentration and hoses.
Coolant
Constant Velocity Joint Boot
Inspect half-shaft boots (if equipped).
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
Ball Joint
Air Filter Element
Inspect and service as required engine air filter, if using Special Operating Conditions, I, D, O.
Replace
Engine Oil
Change engine oil and filter if not using Special Operating Conditions T, I, D, O. Change engine oil and filter if using Special Operating Condition, T, I, D, O.
Rotate
Tires
Rotate tires, inspect tire wear and measure tread depth. If equipped with dual rear wheels, rotate front wheels when specified, rear wheels only when unusual wear is noted. If not using Special Operating Conditions T, I, D, O. Rotate tires, inspect tire wear and measure tread depth. If equipped with dual rear wheels, rotate front wheels when specified, rear wheels only when unusual wear is noted. If using Special Operating Conditions, T, I, D, O.