90000 MI or 144000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Recommended Multi-point Inspection
    Tie Rod End
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level.
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive/Propeller Shaft
      Inspect driveshaft(s) and U-joints; lubricate if equipped with grease fittings.
    Drive Belt
      Inspect accessory drive belt(s).
    Drive Axles, Bearings and Joints
      Inspect front axle and U-joints; lubricate if equipped with grease fittings (4WD vehicles)
    Cooling System
      Inspect engine and secondary cooling system concentration (freeze point protection), additive strength (corrosion inhibitor), coolant level and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
    Air Cleaner Restriction Indicator
      Inspect air filter restriction gauge, replace filter as necessary.
Replace
    Fuel Filter
      Replace engine and frame-mounted fuel filters.
    Filters
      Replace climate-controlled seat filter (if equipped).
    Engine Oil
      Change engine oil and filter.
Service or Charge
    Diesel Emissions Fluid (DEF) System
      Refill diesel exhaust fluid tank.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth; vehicles equipped with dual rear wheels should only rotate the rear wheels if unusual wear is observed.