130000 MI or 208000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Recommended Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      Inspect lubricate if equipped with grease fittings.
    Tie Rod End
      Inspect lubricate if equipped with grease fittings.
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level.
    Exhaust System
      (Inspect functional holes in each leg of the twin tip and the holes under the shield just inboard of the right rear tire to make sure they are kept clean/clear of debris or foreign materials, if using Special Operating Condition O.) Inspect exhaust system and heat shields.
    Drive/Propeller Shaft
    Drive Axles, Bearings and Joints
      Inspect front axle and U-joints; lubricate if equipped with grease fittings (4WD vehicles).
    Cooling System
      Inspect engine and secondary cooling system concentration (freeze-point protection), additive strength (corrosion inhibitor), coolant level and hoses.
    Constant Velocity Joint Boot
      Inspect half shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
      Inspect lubricate if equipped with grease fittings.
    Air Cleaner Restriction Indicator
      Inspect air filter restriction gauge, replace filter as necessary.
Replace
    Engine Oil
      Change engine oil and filter if not using Special Operating Conditions O, D.
Service or Charge
    Diesel Emissions Fluid (DEF) System
      Refill diesel exhaust fluid tank.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth; vehicles equipped with dual rear wheels should only rotate the rear wheels if unusual wear is observed.