Accessories and Optional Equipment: Service and Repair

Upfitter Relay Box









Removal and Installation

1. Remove the upfitter switch assembly. For additional information, refer to Upfitter Switch .

2. Remove the instrument panel steering column opening cover.

3. Disconnect the 14A303 harness from the 14401 harness in-line connector.

4. Remove the ground terminal screw and position the 14A303 harness ground terminal aside.
- To install, tighten to 12 Nm (106 lb-in).

5. Remove the 2 screws and the upfitter relay box and harness assembly.
- To install, tighten to 4 Nm (35 lb-in).

6. To install, reverse the removal procedure.