| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Service or Charge |
| Normal Service |
| 7,500 Miles | 1.8 | 0.0 | C | |
| 15,000 Miles | 1.8 | 0.0 | C | |
| 22,500, Miles | 1.8 | 0.0 | C | |
| Note: |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 30,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| 37,500 Miles | 1.8 | 0.0 | C | |
| 45,000 Miles | 1.8 | 0.0 | C | |
| Note: |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace the air inlet foam filter. |
| 52,500 Miles | 1.8 | 0.0 | C | |
| 60,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note: |
| To Change Front Wheel Bearings and Seals, Add | 2.0 | 0.0 | B | Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used). |
| 67,500 Miles | 1.8 | 0.0 | C | |
| Note: |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 75,000 Miles | 1.8 | 0.0 | C | |
| 82,500 Miles | 1.8 | 0.0 | C | |
| 90,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note: |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 97,500 Miles | 1.8 | 0.0 | C | |
| Note: |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace the air inlet foam filter. |
| 100,000 Miles |
| Note: |
| To Change Engine Coolant, Add | 0.7 | 0.0 | C | |
| To Change Rear Axle Fluid, Add | 0.5 | 0.0 | B | (DANA axles only) |
| 105,000 Miles | 1.8 | 0.0 | C | |
| 112,500 Miles | 1.8 | 0.0 | C | |
| Note: |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 120,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note: |
| To Change Front Wheel Bearings and Seals, Add | 2.0 | 0.0 | B | Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used). |
| 127,500 Miles | 1.8 | 0.0 | C | |
| 135,000 Miles | 1.8 | 0.0 | C | |
| Note: |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 142,500 Miles | 1.8 | 0.0 | C | |
| 150,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note: |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace the air inlet foam filter. |
| To Change Accessory Drive Belt(s), Add | 0.4 | 0.0 | C | |
| To Change Front Axle Fluid, Add | 0.5 | 0.0 | B | (4WD vehicles) |
| To Change Transfer Case Fluid, Add | 0.5 | 0.0 | B | |
| To Change Engine Coolant, Add | 0.7 | 0.0 | C | |
| To Change Automatic Transmission Fluid, Add | 1.5 | 0.0 | B | Change automatic transmission fluid and filter on 6-speed TorqShift transmission. |
| To Change Rear Axle Fluid, Add | 0.5 | 0.0 | B | (DANA axles only) |
| To Change Front Wheel Bearings and Seals, Add | 2.0 | 0.0 | B | Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used). |
| Severe Service |
| 2,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 5,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 7,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| 10,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 12,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 15,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B. |
| 17,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 20,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 22,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 25,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 27,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 30,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter Add, | 1.1 | 0.0 | B | Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B. |
| To Change Wheel Bearing Grease and seals, Add | 2.0 | 0.0 | B | Replace wheel bearing grease and grease seals on 4X2 front wheel bearings (if non-sealed bearings are used) if using Special Operating conditions H, A, T, O, D. |
| 32,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 35,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 37,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| 40,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 42,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 45,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace the air inlet foam filter. |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 47,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 50,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Rear Axle Fluid, Add | 0.5 | 0.0 | B | Change rear axle lubricant (if equipped with a Dana rear axle; some F-350s, all F-450/550s) if using Special Operating conditions H, O. |
| To Change Transfer Case Fluid, Add | 0.5 | 0.0 | C | If using Special Operating Condition, O. |
| 52,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| 55,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 57,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 60,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note |
| To Change Engine Coolant , Add | 0.7 | 0.0 | C | If using Special Operating Condition I, L, H, T. |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter Add, | 1.1 | 0.0 | B | Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B. |
| To Change Transfer Case Fluid, Add | 0.5 | 0.0 | B | if using Special Operating conditions L, H, A, T. |
| To Change Wheel Bearing Grease and seals, Add | 2.0 | 0.0 | B | Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used). |
| 62,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 65,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 67,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 70,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 72,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 75,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B. |
| 77,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 80,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 82,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| 85,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 87,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 90,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter Add, | 1.1 | 0.0 | B | |
| To Change Wheel Bearing Grease and seals, Add | 2.0 | 0.0 | B | Replace wheel bearing grease and grease seals on 4X2 front wheel bearings (if non-sealed bearings are used) if using Special Operating conditions H, A, T, O, D. |
| 92,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 95,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 97,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note: |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace the air inlet foam filter. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| 100,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Rear Axle Fluid, Add | 0.5 | 0.0 | C | (DANA axles only) |
| To Change Engine Coolant , Add | 0.7 | 0.0 | C | |
| To Change Transfer Case Fluid, Add | 0.5 | 0.0 | C | If using Special Operating Condition, O. |
| 102,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 105,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B. |
| 107,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 110,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 112,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| To Change Fuel Filter Add, | 1.1 | 0.0 | B | |
| 115,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 117,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 120,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note |
| To Change Engine Coolant , Add | 0.7 | 0.0 | C | If using Special Operating Condition I, L, H, T. |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter Add, | 1.1 | 0.0 | B | Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B. |
| To Change Transfer Case Fluid Add, | 0.5 | 0.0 | B | if using Special Operating conditions L, H, A, T. |
| To Change Wheel Bearing Grease and seals, Add | 2.0 | 0.0 | B | Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used). |
| 122,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 125,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 127,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| 130,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 132,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 135,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| To Change Fuel Filter, Add | 1.1 | 0.0 | B | |
| 137,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 140,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 142,500 Miles | 0.8 | 0.0 | C | If using Special Operating Conditions O, D. |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace if indicated by gauge if using Special Operating Condition O, D. |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | Only if using Special Operating Condition U but not O, D. |
| 145,000 Miles | 1.8 | 0.0 | C | |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | |
| 147,500 Miles |
| Note |
| To Change Engine Oil and Filter, Add | 0.5 | 0.0 | C | If using Special Operating Condition U. |
| 150,000 Miles | 1.8 | 0.0 | C | OE does not provide a labor time for the climate-controlled seat filter (if equipped). |
| Note |
| To Change Air Inlet Foam Filter, Add | 0.3 | 0.0 | C | Replace the air inlet foam filter. |
| To Change Engine Coolant, Add | 0.7 | 0.0 | C | |
| To Change Accessory Drive Belt(s), Add | 0.4 | 0.0 | C | |
| To Change Fuel Filter Add, | 1.1 | 0.0 | B | Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B. |
| To Change Automatic Transmission Fluid 6 Speed TorqShift, Add | 1.5 | 0.0 | B | Change automatic transmission fluid and filter on 6-speed TorqShift transmission. |
| To Change Transfer Case Fluid Add, | 0.5 | 0.0 | C | |
| To Change Front Axle Fluid, Add | 0.5 | 0.0 | B | Change front axle fluid (4WD vehicles). |
| To Change Rear Axle Fluid, Add | 0.5 | 0.0 | B | DANA Axles Only. |
| To Change Wheel Bearing Grease and seals, Add | 2.0 | 0.0 | B | Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used). |