Seat Latch - Rear, SuperCab

Seat Latch - Rear, SuperCab

Removal and Installation

NOTE: If both latches need to be removed, repeat steps for other side.

1. Remove the seat cushion. For additional information, refer to Seat- Rear, SuperCab Seat - Rear, SuperCab.

2. Remove the support-to-latch bolts.
1. Remove the upper support-to-latch bolt.
- To install, tighten to 33 Nm (24 lb-ft).

2. Remove the lower support-to-latch bolt.
- To install, tighten to 25 Nm (18 lb-ft).

3. Remove the latch cover.

4. Remove the latch-to-cushion frame bolt and latch.
- To install, tighten to 33 Nm (24 lb-ft).

5. To install, reverse the removal procedure.