Glow Plug: Service and Repair

Glow Plug

Removal

1. Remove the LH or RH fender splash shield.

2. NOTE: It may be necessary to unthread the engine sound shield retainers from the engine.
Remove the 5 RH or 4 LH engine sound shield retainers and the RH or LH engine sound shield.

3. Using the tabs on the top of glow plug connector, pull the glow plug connector off the glow plug.

4. Remove the glow plug.

Installation

1. Install the glow plug.
- Tighten to 11 Nm (97 lb-in).

2. Pull the glow plug electrical connector out of the outer sleeve.





3. Connect the glow plug electrical connector to the glow plug and push the connector down to lock the connector on the glow plug.

4. Position the RH or LH engine sound shield and install the 5 RH or 4 LH engine sound shield retainers.

5. Install the LH or RH fender splash shield.