Fuel Pump Control Unit: Service and Repair

Fuel Pump Control Module









Removal and Installation

1. Remove the LH front seat.

2. Remove the scuff plate trim panel and the cowl side trim panel.

3. NOTE: The Fuel Pump (FP) control module is located on the rear surface of the LH front seat mount.
Disconnect the FP (Fuel Pump) control module electrical connector.


4. NOTICE: Do not overtighten the fasteners or damage to the module may occur.

Remove the 2 FP (Fuel Pump) control module nuts.
- To install, tighten to 5 Nm (44 lb-in).


5. To install, reverse the removal procedure.