Pinpoint Test C : Clutch Drag

Manual Transaxle and Clutch

Pinpoint Tests

PINPOINT TEST C : CLUTCH DRAG

C1 CHECK CLUTCH FLUID LEVEL

- Check clutch fluid level.

Is the clutch fluid level between the MAX and MIN marks on the brake fluid reservoir?

Yes
GO to C2.

No
FILL reservoir to specification, CHECK the brake and clutch systems for leaks. TEST clutch system for normal operation.

C2 TEST CLUTCH PEDAL FREE TRAVEL

- Manually operate the clutch pedal to the point of resistance and release.

- Measure pedal travel.

Is the measured dimension within 10 mm (0.393 in)?

Yes
GO to C3.

No
GO to Pinpoint Test B Pinpoint Test B : Clutch Chatter, Rattle OR Shudder.

C3 CHECK THE BELLEVILLE SPRING WASHER OF THE CLUTCH PRESSURE PLATE

- Remove transaxle.

Does the clutch pressure plate or the Belleville spring washer of the clutch pressure plate show signs of wear or damage?

Yes
INSTALL a new clutch pressure plate. TEST the system for normal operation.

No
VERIFY the customer concern. GO to Symptom Chart - Clutch Symptom Chart - Clutch.