Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Fuel Pump Control Unit: Service and Repair
Fuel Pump Control Module
Removal and Installation
1. Remove the RH C-pillar trim panel.
2. Disconnect the Fuel Pump (FP) module electrical connector.
3. NOTICE: Do not overtighten the fasteners or damage to the module will occur.
Remove the 2 FP (Fuel Pump) control module nuts.
- To install, tighten to 5 Nm (44 lb-in).
4. To install, reverse the removal procedure.