Information Bus
Description and Operation
Testing and Inspection- Initial Inspection and Diagnostic Overview
- Symptom Related Diagnostic Procedures
- Pinpoint Tests
- Pinpoint Test A: The PCM Does Not Respond To The Scan Tool
- Pinpoint Test H: The Steering Angle Sensor Module (SASM) Does Not Respond To The Scan Tool
- Pinpoint Test I: The Parking Aid Module (PAM) Does Not Respond To The Scan Tool
- Pinpoint Test K: The Audio Front Control Module (ACM) Does Not Respond To The Scan Tool
- Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool
- Pinpoint Test C: The Instrument Cluster (IC) Does Not Respond To The Scan Tool
- Pinpoint Test D: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
- Pinpoint Test E: The Occupant Classification System Module (OCSM) Does Not Respond To The Scan Tool
- Pinpoint Test F: The 4X4 Control Module Does Not Respond To The Scan Tool
- Pinpoint Test G: The Power Steering Control Module (PSCM) Does Not Respond To The Scan Tool
- Pinpoint Test J: The HVAC Module Does Not Respond To The Scan Tool
- Pinpoint Test L: The Audio Digital Signal Processing (DSP) Module Does Not Respond To The Scan Tool
- Pinpoint Test M: The Front Controls Interface Module (FCIM) Does Not Respond To The Scan Tool
- Pinpoint Test N: The Front Display Interface Module (FDIM) Does Not Respond To The Scan Tool
- Pinpoint Test O: The Driver Seat Module (DSM) Does Not Respond To The Scan Tool
- Pinpoint Test P: The Rear Entertainment Module (RETM) Does Not Respond To The Scan Tool
- Pinpoint Test Q: The Liftgate/Trunk Module (LTM) Does Not Respond To The Scan Tool
- Pinpoint Test R: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool
- Pinpoint Test S: The Global Positioning System Module (GPSM) Does Not Respond To The Scan Tool
- Pinpoint Test T: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Scan Tool
- Pinpoint Test U: Intermittent No (HS-CAN) Communication, Communication Can Be Intermittently Established
- Pinpoint Test V: No High Speed Controller Area Network (HS-CAN) Communication, All Modules Are Not Responding
- Pinpoint Test W: Intermittent No (MS-CAN) Communication, Communication Can Be Intermittently Established
- Pinpoint Test X: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not Responding
- Pinpoint Test Y: No Power To The Scan Tool
- Programming and Relearning
Diagrams