Air Conditioning (AC) Compressor External Leak Test

Air Conditioning (AC) Compressor External Leak Test

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Component Test

1. Install the adapter from the A/C (Air Conditioning) Flush Adapter Kit on the port of the A/C (Air Conditioning) compressor, using the existing manifold retaining bolt.

2. Connect the high and low pressure lines of a manifold gauge set or a refrigerant recovery/recycling station to the corresponding fittings on the adapter.

3. Attach the center hose of a manifold gauge set to a refrigerant container standing in an upright position.

4. Open the low pressure gauge valve, the high pressure gauge valve and the valve on the refrigerant container to allow the refrigerant vapor to flow into the A/C (Air Conditioning) compressor.

5. Using the Refrigerant Leak Detector, check for leaks at the compressor shaft.

6. If an external leak is found, install a new A/C (Air Conditioning) compressor.

7. When the leak test is complete, recover the refrigerant from the compressor.