Catalytic Converter - Underbody

Catalytic Converter - Underbody

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove and discard the 2 exhaust flexible pipe-to-catalytic converter nuts.
- Discard the gasket.

- To install, tighten to 40 Nm (30 lb-ft).


3. Remove the Torca(R) clamp. For additional information, refer to Torca(R) Clamp Procedures.

4. Separate the catalytic converter from the muffler and tail pipe.
- Remove the catalytic converter.


5. To install, reverse the removal procedure.
- Install a new gasket and nuts.


6. Start the engine and check for exhaust leaks.