Pilot Bearing: Service and Repair

Pilot Bearing





Removal

1. Remove the clutch disc and pressure plate. For additional information, refer to Clutch Disc and Pressure Plate Service and Repair.

2. Using the Pilot Bearing Remover, remove the pilot bearing.





3. Inspect the pilot bearing for:
- misalignment and looseness in the flywheel.

- needle rollers for scoring, worn or broken needle rollers, inadequate grease or discoloration.

- seal leakage.


Installation

1. NOTE: The pilot bearing can only be installed with the seal facing the transmission. The pilot bearing is pregreased and does not require additional lubrication. A new pilot bearing must be installed whenever it is removed.
Using a soft-face hammer and the Pilot Bearing Installer, install the pilot bearing.






2. Install the clutch disc and pressure plate. For additional information, refer to Clutch Disc and Pressure Plate Service and Repair.