Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Mustang V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Bumper - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Bumper - Front




Bumper - Front









Removal and Installation

1. Remove the front bumper cover. For additional information, refer to Bumper Cover- Front Service and Repair.

2. Remove the 4 front bumper isolator pin-type retainers and the front bumper lower outer and upper center inner isolators.

3. Drill out the 6 front bumper spot welds.

4. Remove the 8 front bumper bolts and the front bumper.
- To install, tighten to 25 Nm (18 lb-ft).


5. NOTE: Spot welding the bumper is not required for installation.
To install, reverse the removal procedure.

pro multis · About Operation CHARM