Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Mustang V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Brake Caliper Support Bracket
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Caliper Support Bracket




Brake Caliper Support Bracket

Removal and Installation

1. Remove the rear axle shaft.

2. Remove the 3 bolts and the brake disc shield.
- To install, tighten to 20 Nm (177 lb-in).


3. NOTE: Make sure the anti-moan bracket holes, the brake caliper support bracket and the brake caliper anchor plate holes line up during installation.
Remove the anti-moan bracket.

- To install, tighten to 35 Nm (26 lb-ft).


4. Remove the 4 brake caliper support bracket nuts, bolts and the bracket.
- To install, tighten to 68 Nm (50 lb-ft).


5. To install, reverse the removal procedure.
pro multis · About Operation CHARM