Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Mustang V6-3.7L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Spray Nozzle >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Spray Nozzle: Service and Repair




Washer Jet

Removal

1. Lower the rear part of the hood insulator to access the washer jet-to-washer jet hose C-lock coupler.

2. Disconnect the washer jet-to-washer jet hose. For additional information, refer to C-Lock Coupler Description and Operation.

3. NOTICE: When prying on a component, a non-marring tool must be used or damage to the component may occur.

Remove the washer jet.
- Insert a sturdy plastic card between the washer jet and the hood. Press forward to release the retaining clip.






Installation

1. Place the washer jet tab in the hood and press forward until a click is heard.

2. NOTE: Verify the washer jet hose connector lock ring is in the locked position.
Connect the washer jet hose to the washer jet.


3. Position the hood insulator.
pro multis · About Operation CHARM